The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Working on my aftermarket Boxsides

**mongocanfly** · 08-26-2018, 06:57 PM

On the taillight opening you could use a trick that some use for closing door gaps...
Make a slit in the metal across the top of the opening and around the curve going down and move the opening down..then you'll have to add a sliver of metal back in the gap and weld it up...
Will need cut behind light as well...
Gotta love the quality of repop...

08-26-2018, 06:57 PM	#13
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,585	Re: Working on my aftermarket Boxsides - need some ideas/input On the taillight opening you could use a trick that some use for closing door gaps... Make a slit in the metal across the top of the opening and around the curve going down and move the opening down..then you'll have to add a sliver of metal back in the gap and weld it up... Will need cut behind light as well... Gotta love the quality of repop... Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 08-26-2018 at 07:03 PM.