[drewbert41]

Still have not driven it since rewiring. I discovered that I had a crack in my exhaust manifold that had melted a boot. Could explain why it was backfiring through the carb. I got Summit coated headers for Christmas so I have been working on installing them. I also had to get a bracket for the alternator to work with the headers. Had to pull the starter to get the pass side header to fit. At least one of my plugs is way too close to the tube. I am going to have to buy some shorty plugs and possibly have to put in a well placed ding in a tube. I have heat wraps for the boots. This is also my first post since running a steel fuel line to replace the leaking rubber one it came with. I also took the cowl off and put some seam sealer under there to stop a leak I had in the pass side floorboard from the antenna hole.