|
Re: Patch panel
Quote:
Originally Posted by steveimpala
I pulled up the carpet on the '69 C20 and I found some rust that will need to be cut out and patched up. Seems to be a common location right below the high-low dimmer switch. What size gauge metal would you recommend for this location ?
Thanks !
|
It is relatively small as it sits but once you start cutting it will be much larger. I'll bet once you start cutting it will be well up into the firewall floor pan pinch weld . Mine was just a bit till I started working it . I made all the pieces by hand with 16 guage sheet metal . I wouldn't go higher than 18
See your in Wappingers falls I have a house in the Riverview area off of Channingville rd .
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
Last edited by 72c20customcamper; 11-13-2021 at 01:50 PM.
|