View Single Post
Old 06-04-2016, 06:24 PM   #2
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 1,318
Re: Replacing my resistor wire with HEI power supply wire, in pictures

Part 2

Loosen the bulkhead connector with a 3/8" nutdriver, and slide it apart. Notice the white wire that is cloth-wrapped, that is the resistor wire that leads to the yellow wire. From the inside of the connector, squeeze the terminal with needle-nose pliers while pushing it gently toward the back of the connector.
Attached Images
     

Last edited by dmjlambert; 06-04-2016 at 06:29 PM.
dmjlambert is offline   Reply With Quote