Thread: R134 condensor
View Single Post
Old 06-30-2010, 10:17 AM   #25
87chevy.com
BMW & ASE Master Certified
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,255
Re: R134 condensor

i have the stock condensor and evap in the truck. orielly orfice tube and accumulator, stock 5.3 compressor and after i put the fan shroud on the truck the vent temps are at 50* after 5 mintues of driiving. charged the system to 1.85ish lbs and the pressures were at 28-35low and 200-220 on the high. good enough in my book. I had it at 1.75lbs but the compressor would cycle at idle.. added the extra .1 and it doesnt cycle as much and the high side pressures only went up like 5psi..
clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress
87chevy.com is offline   Reply With Quote