The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Hydroblasting / Sandblasting frame..this is bugging me

Jrainman · 02-06-2017, 09:02 PM

I do agree with you ,but the way you are talking about mediablasting a frame is not doing 100% of the job , 80% is more likly. doing a 100% frame mediablasting in my opinon would require 100% of the frame to be dismantled all rivits cut all crossmembers and brackets taken off till the rails are separated then you can achieve 100% blasting and 100% coating.

and trust me there are a lot of rivits and it takes time to get a frame to that point . and also at this stage it would not matter if you did a dustless blasting or a dry media blasting .

02-06-2017, 09:02 PM	#9
Jrainman Registered User Join Date: Jul 2015 Location: North East PA Posts: 682	Re: Hydroblasting / Sandblasting frame..this is bugging me I do agree with you ,but the way you are talking about mediablasting a frame is not doing 100% of the job , 80% is more likly. doing a 100% frame mediablasting in my opinon would require 100% of the frame to be dismantled all rivits cut all crossmembers and brackets taken off till the rails are separated then you can achieve 100% blasting and 100% coating. and trust me there are a lot of rivits and it takes time to get a frame to that point . and also at this stage it would not matter if you did a dustless blasting or a dry media blasting .