Re: Front 10 Bolt Teardown / Rebuild PICTURES!
Since im doing a 4 inch suspension lift I will have to remove the stock steering arm and replace it with a modified verizon. Pretty simple job. The steering arm is located on top of the driver side knuckle and secured with 3 nuts and 3 cone washers. Go get your Huge @$$ breaker bar, an extension and a 7/8" socket. Start by removing all three nuts holding the steering arm down. After the nuts are removed hit it with some PB blaster and let it sit on the cone washers. As you can tell by the picture I totally missed. (Its hard to hold a camera and spray at the same time)
|