The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Flying Hamster · 05-29-2017, 11:34 AM

So...
Plugs and wires changed. Wanna change cap and rotor, but i'm hearing that the distributor is PLASTIC and usually breaks thru the screw holes. Also noticed there is no way in hell the distributor will come out past the cowl...
Short of pulling the motor, that is...
Any suggestions on how to NOT break the distributor?

05-29-2017, 11:34 AM	#1
Flying Hamster Registered User Join Date: Aug 2015 Location: Starbase 4 Posts: 118	4.3 "Crab Cap" So... Plugs and wires changed. Wanna change cap and rotor, but i'm hearing that the distributor is PLASTIC and usually breaks thru the screw holes. Also noticed there is no way in hell the distributor will come out past the cowl... Short of pulling the motor, that is... Any suggestions on how to NOT break the distributor? __________________ 2006 Sierra RCSB V6 5 Speed RWD.