The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bdiamond · 05-10-2015, 11:42 PM

If the 1/2 ton ball joints swap right over to the C20 arms, but the lower arms are different with larger OD ball joints, and the C20 upper arms have the HD type bushings which are different vs C10's after 72... how then do the "1/2 ton ball joints swap right over?"

I was referring to bolting the 1/2 ton BJ into the existing 3/4 ton upper arm. I believe SCOTI was too. The entire 1/2 ton lower can be used in place of the 3/4 ton unit.

05-10-2015, 11:42 PM	#7
bdiamond Registered User Join Date: Sep 2007 Location: Wichita Falls, Texas Posts: 459	Re: C20 8lug to C10 5lug! If the 1/2 ton ball joints swap right over to the C20 arms, but the lower arms are different with larger OD ball joints, and the C20 upper arms have the HD type bushings which are different vs C10's after 72... how then do the "1/2 ton ball joints swap right over?" I was referring to bolting the 1/2 ton BJ into the existing 3/4 ton upper arm. I believe SCOTI was too. The entire 1/2 ton lower can be used in place of the 3/4 ton unit.