Re: Gas Pedal Installation
Quote:
Originally Posted by sweetk30
firewall in engine bay take a pick and pop the 3 holes so you can see them inside .
black plastic first against firewall / rod unit sits in the middle with roll pin out / bracket goes on last to sadwich all of it in place / then 3 long course thread bolts black almost like a lag bolt hold it in place .
and 2 bolts up top 1 down low .
|
This is correct install. There are only 3 screws used that screw in from inside cab into firewall. The pedal shaft should be slotted at top end for cable to slide in to.
__________________
1974 Cheyenne 10 LWB Stock 350 W/HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice
|