[Tilldogg]

Originally Posted by Tilldogg

Update
so it turned out to be this problem you see two phots pictures here, one is my trans, and the other is an example of what it should look like, there is a S spring that clips onto the Hedge Comb, this controls the flow of fluid and as mine came off the fluid was flowing no matter what, this could not move, the hedge comb was loose and should be torqued the nut to 30 neutrons, wasnt easy as only get a small wrench in there, and i got it tight as i can and a bit more, this then aligned up the shifter tooso all is well again, if you need anymore description,

added pitcures i think...