A disc/drum brake system from the factory used 3/16" lines from the proportioning valve to the front hoses. Then a 1/4" linefrom the proportioning valve to the hose that drops down to the rear differential. Then from the 'Tee' at the end of the hose the lines to the rear wheel cylinders were 3/16"
Quote:
Originally Posted by 66_k10_manny
Brake question - just picked up a new proportioning valve from summit. Do I have to run a bigger diameter lines to the front disc brakes than the rear? Heard that disc brakes will require more fluid to properly operate.
|