View Single Post
Old 12-12-2013, 01:30 AM   #250
VetteVet
Msgt USAF Ret

 
VetteVet's Avatar
 
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,703
Re: I suck at reading wiring diagrams..

Try this one.

Name:  Cab-2-web.jpg
Views: 348
Size:  104.5 KB

and here's yours.

Name:  Cab-1web.jpg
Views: 347
Size:  101.1 KB

Ignore the arrows

bottom to top.

White-brake switch.

Dark green -to right rear turn/brake light- goes to the connector in the firewall behind the distributor

Yellow- to left rear turn/brake light- goes to the connector in the firewall behind the distributor.

Purple - from fuse panel flasher to turn signal switch.

Brown- from fuse panel hazard flasher to turn signal switch

Dark blue- from turn signal switch to front right signal with a connector wire to the dash cluster for the right signal indicator light.

Light blue - from turn signal switch to left front signal light with a connector wire to the dash for the left turn indicator light.

The dark blue and light blue wires go from the connector through the firewall wiring block into the engine bay and through the harness to the left and right signal lights. The connector wires join them at the block on the inside of the cab or at the half moon connector.

Black- this is the horn relay ground wire from the steering column to the horn relay.


What else you got.
__________________
VetteVet

metallic green 67 stepside
74 corvette convertible
1965 Harley sportster
1995 Harley wide glide

Growing old is hell, but it beats the alternative.
VetteVet is offline