The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 04-09-2006, 09:59 AM

Yes the nut, Hammer, smack works great! I have been doing it this way for about 20yrs now with out fail or injury. Just did it yesterday on "Project Trazer" (blazer section) so we can detail the frame and install a "C" notch kit.Zumo do you plan on just cutting the front springs or also the rear? I think the rear will give you some trouble trying to clamp them back inplace. May be someone has a tip on this as well for you since we have only be talking acout the fronts so far! Good luck and do not for get the brfore and after pics!!!

Kevin
LFD Inc.

04-09-2006, 09:59 AM	#20
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Any tips for spring removal? Yes the nut, Hammer, smack works great! I have been doing it this way for about 20yrs now with out fail or injury. Just did it yesterday on "Project Trazer" (blazer section) so we can detail the frame and install a "C" notch kit.Zumo do you plan on just cutting the front springs or also the rear? I think the rear will give you some trouble trying to clamp them back inplace. May be someone has a tip on this as well for you since we have only be talking acout the fronts so far! Good luck and do not for get the brfore and after pics!!! Kevin LFD Inc.