Thanks.
Well I did a bit more cleanup including cutting off the steering box. Did a mock fitup and there is clearance issues due to the lower frame. So that has to be cutout (instructions do say so).
Basically all this metal on the outside of the boxing plates needs to be cutout with a sawzall.
So then I after I put it back together - but IM still about 1/16th inch too short frame to frame meaning I cant get the cross member in place. Pretty sure Im either going to have to spread the frame that distance of grind back on the crossmember. But I stopped here due to wanting to check with Steve at IC that thats normal.
Here you see the chevron back spacers that go plush against the inside of the frame to space out the boxing plates and add strength.
