The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - NEED!!! Torque Sequence and values for 350 head

**Nima** · 10-09-2004, 05:08 PM

Based on Haynes manual, the torque for small block intake is 30. Based on edlebrock instruction, the torque for their intakes is 25, then I guess somewhere between 25-30 is ok based on the type of intake. For head, the torque is 65 for small block (based on Haynes). As far as the sequence goes, I have a picture and I'll try to post it, but for now I can just say they start from the middle and gradually goes to the both ends. I hope this helps.

10-09-2004, 05:08 PM	#4
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,169	Based on Haynes manual, the torque for small block intake is 30. Based on edlebrock instruction, the torque for their intakes is 25, then I guess somewhere between 25-30 is ok based on the type of intake. For head, the torque is 65 for small block (based on Haynes). As far as the sequence goes, I have a picture and I'll try to post it, but for now I can just say they start from the middle and gradually goes to the both ends. I hope this helps.