The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Cut wires on door

62step · 09-27-2018, 10:02 AM

Thanks for the diagram, I do not hear the fuel pump prime, I just hear what sounds like a fuel pump priming in the passenger side of the dash.. (Heard it does that heater core or something, I don't know) After I did the compression test and it being 90 psi when it's supposed to be near 180 (?) I'm thinking the engine is done.

I will try and tilt the bed up probably friday night and see if all the connections are good, see if the tank needs to replaced or just drained. I also need to find the bolt size for the bed.

I appreciate everyone's responses.

09-27-2018, 10:02 AM	#13
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	Re: Cut wires on door - 1992 c1500 Thanks for the diagram, I do not hear the fuel pump prime, I just hear what sounds like a fuel pump priming in the passenger side of the dash.. (Heard it does that heater core or something, I don't know) After I did the compression test and it being 90 psi when it's supposed to be near 180 (?) I'm thinking the engine is done. I will try and tilt the bed up probably friday night and see if all the connections are good, see if the tank needs to replaced or just drained. I also need to find the bolt size for the bed. I appreciate everyone's responses.