The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Cut wires on door

62step · 12-12-2018, 11:51 AM

I tried jumping the Gray and orage wires from the fuel pump relay connector with no luck of hearing the fuel pump come on. (Ignition key ON)

Also, everything is unplugged, but I figured I would try and jump it just to see if it works. Do I need to jump wires on the oil pressure switch also?

Thanks!

P.S. Engine is getting bored out 30 over due to rust pitting in cylinder walls.

12-12-2018, 11:51 AM	#18
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	Re: Cut wires on door - 1992 c1500 I tried jumping the Gray and orage wires from the fuel pump relay connector with no luck of hearing the fuel pump come on. (Ignition key ON) Also, everything is unplugged, but I figured I would try and jump it just to see if it works. Do I need to jump wires on the oil pressure switch also? Thanks! P.S. Engine is getting bored out 30 over due to rust pitting in cylinder walls.