The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

87chevy.com · 07-09-2018, 06:27 PM

Sharing the exhaust u bend fixture I've made.

Made the back fence tensioner out of a scrap away bar link. A regular bolt works too. I had to use a regular bolt for the stait cuts due to the lack of space.

Makes it easy as pie to duplicate the plastic version. The back fence makes it so much safer too. Also works for any size tube if the chop saw can handle it. Metal saw blade is the best thing as the abrasive deflects to much to be accurate

07-09-2018, 06:27 PM	#198
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,255	Re: LT1 GenV swap Sharing the exhaust u bend fixture I've made. Made the back fence tensioner out of a scrap away bar link. A regular bolt works too. I had to use a regular bolt for the stait cuts due to the lack of space. Makes it easy as pie to duplicate the plastic version. The back fence makes it so much safer too. Also works for any size tube if the chop saw can handle it. Metal saw blade is the best thing as the abrasive deflects to much to be accurate __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress