Re: 1965 Short Bed Fleetside - Build to Daily Driver
Finally got the front end swapped out. Everything tight, greased and brakes bled. Everything went together well, but the Lower Control Arm bushings were a bear to get done. Took it out for a drive, still needs some bleeding, but night and day difference from the original drums!
Also working on getting some modern belts installed. The truck came with the driver with a 3 point, but no other belts. Picked up a set from a 2010 Ford extended cab. Got the passenger finished, turned out good. I used a plate on top and on the bottom, then used a nut welded to a large washer for the shoulder pivot.
|