The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

hotrodder · 12-16-2014, 07:22 PM

Having done body 7 FRAME WORK FOR 52 YRS. I have seen this problem . It's not uncommon, a body shop with a frame rack can easily solve the problem. It is just a matter of tying down the truck and pulling the frame out on which ever side is in a little. Most of the time a chain can be attached to the upper control arm mount and pulled.GM vehicles were the worst about this.Might take a older old dude that has done this before.

12-16-2014, 07:22 PM	#5
hotrodder Registered User Join Date: Oct 2011 Location: Bloomington Indiana Posts: 322	Re: control arm Having done body 7 FRAME WORK FOR 52 YRS. I have seen this problem . It's not uncommon, a body shop with a frame rack can easily solve the problem. It is just a matter of tying down the truck and pulling the frame out on which ever side is in a little. Most of the time a chain can be attached to the upper control arm mount and pulled.GM vehicles were the worst about this.Might take a older old dude that has done this before.