Re: 72 Blazer build
Once the welding and metal work was finished up I started on the bodywork. Even though most of the panel were new they were still far from perfect. I again put the doors and fenders back on to double check the gaps and make sure fitment to the adjacent panels was good.
I ended up using a hood off of another old truck I had because the one off of the blazer was simply going to need a lot of work to get it where I wanted it.
After a few weeks of applying and sanding filler I was satisfied and applied d 3 heavy coats of Matrix 2k high build primer. I then let it sit for a couple weeks before attempting to final sand
|