The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mcbassin · 08-09-2009, 10:36 PM

RF,
I am so pumped that you saw my post. You have an awesome truck there!
I posted my own thread (http://67-72chevytrucks.com/vboard/s...75#post3455975) before I did a search on Google and found cjRacing's thread. I see that you are a bonafied expert on the subject and you have been through this before. You are welcome to chime in on my thread too. You right on the money about the oil/trans leaks. I am planning to put new v/c gaskets and pan gaskets and any other easy fixes since the engine is out already.
Right now I'm a little overwhelmed with the wiring thing, but I'm sure I can work around that eventually. I will definetly have some questions in a day or two. thanks for your reponse,
Mike

08-09-2009, 10:36 PM	#262
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Tbi swap build thread RF, I am so pumped that you saw my post. You have an awesome truck there! I posted my own thread (http://67-72chevytrucks.com/vboard/s...75#post3455975) before I did a search on Google and found cjRacing's thread. I see that you are a bonafied expert on the subject and you have been through this before. You are welcome to chime in on my thread too. You right on the money about the oil/trans leaks. I am planning to put new v/c gaskets and pan gaskets and any other easy fixes since the engine is out already. Right now I'm a little overwhelmed with the wiring thing, but I'm sure I can work around that eventually. I will definetly have some questions in a day or two. thanks for your reponse, Mike __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 08-12-2009 at 03:42 PM.