The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cjracing15 · 08-09-2009, 11:23 PM

You can go back to the first page of this thread and look on post # 8 and I listed all the wires by color and what pin that it goes to. It should be the same with the harness you have with maybe a few extra wires throwed in. Then you can look on page #3 of this thread starting with post # 65 and see what me and RF did as far as routing the spaghetti of wires that you will have left over. You need to get real familiar with a soldering iorn

. Later

08-09-2009, 11:23 PM	#265
cjracing15 Registered User Join Date: Jan 2007 Location: Lexington, TN Posts: 1,427	Re: Tbi swap build thread You can go back to the first page of this thread and look on post # 8 and I listed all the wires by color and what pin that it goes to. It should be the same with the harness you have with maybe a few extra wires throwed in. Then you can look on page #3 of this thread starting with post # 65 and see what me and RF did as far as routing the spaghetti of wires that you will have left over. You need to get real familiar with a soldering iorn . Later __________________ The fleet 94 Chevy 4x4 reg cab 2018 Traverse (wifes car) 1977 SWB stepside 1949 Chevy truck Last edited by cjracing15; 08-09-2009 at 11:28 PM.