The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Rewired 70 C10 heater and running lights on even if ign is not plugged in.

C10Coloradoguy · 08-28-2017, 01:31 PM

My inexperience will probably show here so bear with me...

Here are the results with the new switch and both positions of the HAZARD knob:

A) Hazard knob pulled all the way out - No fuses pop but no signal lights at all when switch is pushed left or right. All other light functions seem to work.
B) Hazard knob pushed in - Hook the negative cable back up and HZRD fuse blows immediately

I feel like this should tell me what or where the problem lies but like I said, this is my first time wiring a vehicle and I'm learning as I go. Help me VV-wan-kenobi, you're my only hope.

08-28-2017, 01:31 PM	#30
C10Coloradoguy Registered User Join Date: Jul 2017 Location: Highlands Ranch, CO Posts: 39	Piecing the puzzle together My inexperience will probably show here so bear with me... Here are the results with the new switch and both positions of the HAZARD knob: A) Hazard knob pulled all the way out - No fuses pop but no signal lights at all when switch is pushed left or right. All other light functions seem to work. B) Hazard knob pushed in - Hook the negative cable back up and HZRD fuse blows immediately I feel like this should tell me what or where the problem lies but like I said, this is my first time wiring a vehicle and I'm learning as I go. Help me VV-wan-kenobi, you're my only hope.