The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - '78 K20 to C10. Almost 20 years in the making.

cruizin01 · 11-19-2017, 10:46 PM

Got the front subframe located today. Made a template out of a sheet of aluminum. It worked prefect on the drivers side. I tried using it on the pass side and the holes werent perfect but i made it work and the subframe is square to the frame and located correctly. I still need to drill the holes for the idler arm and locate the holes for the swaybar bracket. I also need to modify and relocate the front brake line where is passes through the frame.

11-19-2017, 10:46 PM	#30
cruizin01 Registered User Join Date: Mar 2016 Location: Cbus, Ohio Posts: 290	Re: '78 K20 to C10. Almost 20 years in the making. Got the front subframe located today. Made a template out of a sheet of aluminum. It worked prefect on the drivers side. I tried using it on the pass side and the holes werent perfect but i made it work and the subframe is square to the frame and located correctly. I still need to drill the holes for the idler arm and locate the holes for the swaybar bracket. I also need to modify and relocate the front brake line where is passes through the frame. Last edited by cruizin01; 11-20-2017 at 03:38 PM.