The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

70K10Hunter · 10-22-2017, 12:09 AM

So I pulled my cab today and then pulled the 203. The 205 bolted right up to my tranny no mods needed. Before I pulled anything I marked the location of the front of the trans with a straight edge then mounted everything, used same mounts and did not need to move the cross member. Its all good, now just need to do the drive shafts.

10-22-2017, 12:09 AM	#14
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: NP 203 to NP205 So I pulled my cab today and then pulled the 203. The 205 bolted right up to my tranny no mods needed. Before I pulled anything I marked the location of the front of the trans with a straight edge then mounted everything, used same mounts and did not need to move the cross member. Its all good, now just need to do the drive shafts.