Quote:
Originally Posted by Stocker
The inner lamps are high-beam only.... the outer ones have both high and low beams. Your drivers side high beam might just have a bad filament (burned out sealed beam). Or it could be a bad connector, or a wiring problem.
Make sure all connections are clean & snug and no wires are broken. Do you have a test light or a voltmeter? Easiest place to start is to check if there's 12VDC at the connector on the back of the lamp. If not, there's a wiring problem. If you have voltage, wiggle the connector and see if the lamp comes on. If not, it's probably a bad headlamp unit. Swap with your good one from the passengers side to verify it.
|
Awsome thanks man I'll try that everyone on here is very helpful I'm learning a freeking bunch reading everybody's threads