The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*78 Chevyrado* · 03-12-2009, 09:26 PM

Might have just been a bad core. You'll have to take the crank and rods out to at least check the bearings, and I'd clean out the oil passages. Some small bit of metal had to have come off of it. Then go from there.

03-12-2009, 09:26 PM	#2
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: 350 chevy cam problems Might have just been a bad core. You'll have to take the crank and rods out to at least check the bearings, and I'd clean out the oil passages. Some small bit of metal had to have come off of it. Then go from there.