Re: Post Pics of your Static Drops!!
forestb
the bump stops are the first thing that hits with no front springs in it.
so I removed them now the lower a arms are sitting tight against the cross member.
it has stock spindles on it and the cross member is about a inch or 2 off the ground now.
in the back the stock un cut frame rails are laying on the rear axel housing .
I need to pan cake the front cross member 2 inches and put C notches in the back
so I can put some short springs in it to get some working suspension .
its going to be a 6cyl 5spd .
Last edited by 60chevyjim; 03-09-2016 at 04:50 PM.
|