|
Re: All about heaters.
Does anybody have a good view of the inner door inside the blower housing on the 64-66 Deluxe heater? This flap is actuated by a cable that protrudes through the firewall on the inboard side of the box, adjacent to the passenger-side valve cover. I'm restoring mine, and the rubber material (the flap) on the edge of the door was missing. I had to remove the entire door, which meant cutting the lever arm off and driving the pin through.
The picture angle I need to see is where the lever arm is in relation to the door's position inside the blower housing. I'm 95% sure of where it needs to go, but I would hate to get it wrong and have the door not go open fully or be 180 degrees off of the lever position.
By the way, my heater assembly is for an A/C truck. My original box was so rusted that I'm swapping all the A/C specific parts over to a good rust-free box. I'm not sure if the flap is specific for the A/C trucks.
|