[mikesacs]

I just installed a new set of headlights with the 9007 bases. These are the ones LMC sells along with a relay harness. I ended up doing a lot of modification with the harness to make it work. It is installed backwards with the wiring routing through the passengers side of the radiator support. I did this to keep the power leads as short as possible. They are connected directly to the alternator. The light output is extremely better than stock. I still need to work on the aiming. I followed some instruction to adjust both high and low pattern about 3" lower at 25'. I did this for both high and low, as the instructions said. But, when I try them on the road both patters are about in the same place. Which I guess they should be since that is how I aimed them! I moved the high beam lights up some and that helps, but I still feel like I'm missing good instructions for quad headlights.