|
Re: LT1 GenV swap
The hydroboost isn't a necessity, but definatly will give you clearance between the valve cover and it's trim cover. I have the mltor as far back and as low as it can go with clearance of course and the beauty cover to booster has only 1/4-1/2" clearance iirc.
Clint
Quote:
Originally Posted by Jvalaniz
Just went through the whole thread, and got plenty of information. Thank you. I have a 2016 L83 with the 8L90, and looking forward to getting her wedged in to my 1992 single cab silverado. I just ordered the accessory bracket from DD, along with Sanden compressor and adapters for corvette water pump. I was also going to order the hydroboost brake booster, but just don't have enough information to pull the trigger. I was hoping to get you all's opinion. Thanks in advance for any information, and great thread.
|
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|