The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Opinions welcome. Putting a wing onto my car with pic.

68C15 · 10-28-2018, 07:46 PM

This year I've done 2 of these cars replacing fuel and brake lines. I use the flexible copper rolled up stuff and flare the ends for brake lines. Then use nylon for the fuel lines. If you gently warm them up with a heat gun then you can mold them to go around corners. Be careful to not bend too sharp or use too little heat, they will kink

10-28-2018, 07:46 PM	#11
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Opinions welcome. Putting a wing onto my car with pic. This year I've done 2 of these cars replacing fuel and brake lines. I use the flexible copper rolled up stuff and flare the ends for brake lines. Then use nylon for the fuel lines. If you gently warm them up with a heat gun then you can mold them to go around corners. Be careful to not bend too sharp or use too little heat, they will kink __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card