The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Edelbrock/Carter AFB rebuild kit

toolboxchev · 10-14-2017, 01:07 PM

So I have an Edelbrock on my 350. I also have and old Carter sitting in storage. Luckily I have been able to run E-10 and have not rebuild the carb since new over 8 years ago.

Now when looking for gaskets and accel pumps I would be looking for kits that would be ethanol resistant.

In my manual from Ebrock it says these things can be setup to run ethanol. The only mod I have done so far is replace the springs with the silver, or clear set and I have seen an improvement. Ebrock sent them to me free of charge to help out.

They have excellent customer service.

10-14-2017, 01:07 PM	#8
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Edelbrock/Carter AFB rebuild kit - need knowledge So I have an Edelbrock on my 350. I also have and old Carter sitting in storage. Luckily I have been able to run E-10 and have not rebuild the carb since new over 8 years ago. Now when looking for gaskets and accel pumps I would be looking for kits that would be ethanol resistant. In my manual from Ebrock it says these things can be setup to run ethanol. The only mod I have done so far is replace the springs with the silver, or clear set and I have seen an improvement. Ebrock sent them to me free of charge to help out. They have excellent customer service.