Quote:
Originally Posted by azsnow
Thanks! What I gather is that the two red leads connect together, then will run down to the center terminal on the starter. The white lead will go to the amp guage, and then to the switched poer source.
|
I'm assuming that you are using a standard GM 10SI alternator. The amp guage would go in the red wire as shown in the pic in post number two, not in the white wire. If you have an amp guage you don't need the white wire at all. The white wire controls the indicator light in cars that don't have an amp guage.
You don't need anything connected to post 1 for the alternator to work correctly.