The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

SC1969c10 · 07-30-2018, 06:00 PM

Hey everyone,

I went to install a new tachometer as the previous one was not working. So i picked up an equus 6068 (black to match the dash a little better). Anyways installed everything, followed directions, and the RPMs were bouncing around between 4-5k at idle. Called theyre hotline and guy tells me it must be bad, return it and get another one. Went and hooked up the new one today and the same exact problem. Called the 800 hotline and he tells me to clean out the inside of the distributor.

Just figured I would ask here, maybe someone has experienced similar.

Thanks in advance.

Also, noticed this loose blue wire/socket from previous owner
Posted via Mobile Device

07-30-2018, 06:00 PM	#1
SC1969c10 Registered User Join Date: Jul 2018 Location: Little River, SC Posts: 105	Tach install trouble Hey everyone, I went to install a new tachometer as the previous one was not working. So i picked up an equus 6068 (black to match the dash a little better). Anyways installed everything, followed directions, and the RPMs were bouncing around between 4-5k at idle. Called theyre hotline and guy tells me it must be bad, return it and get another one. Went and hooked up the new one today and the same exact problem. Called the 800 hotline and he tells me to clean out the inside of the distributor. Just figured I would ask here, maybe someone has experienced similar. Thanks in advance. Also, noticed this loose blue wire/socket from previous owner Posted via Mobile Device Attached Images Last edited by SC1969c10; 07-30-2018 at 09:45 PM.