The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

SCOTI · 05-02-2018, 06:24 PM

I looked into doing Dodge/Ram 17" 03-11 dually wheels. I like their simulators better vs GM's or aftermarket (they remind me of a chrome, old-school, 'slot' type wheel). The bolt pattern was the same dimensionally but they needed hub centric centering rings so they didn't rely solely on the studs/lug-nuts. Unfortunately, they added ~1/2" to overall footprint (1/4" on the outer side) so I wound up not being able to use them since my set-up is UBER close w/the 16's.

05-02-2018, 06:24 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,917	Re: NEED HELP!! 73 Dually Wheels I looked into doing Dodge/Ram 17" 03-11 dually wheels. I like their simulators better vs GM's or aftermarket (they remind me of a chrome, old-school, 'slot' type wheel). The bolt pattern was the same dimensionally but they needed hub centric centering rings so they didn't rely solely on the studs/lug-nuts. Unfortunately, they added ~1/2" to overall footprint (1/4" on the outer side) so I wound up not being able to use them since my set-up is UBER close w/the 16's. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*