View Single Post
Old 02-17-2014, 11:01 AM   #2
Registered User
mattcrp1's Avatar
Join Date: May 2010
Location: Mountain House, CA
Posts: 556
Re: Upper Control arm bushing replacement

Once in the vise and soaked with PB blaster, I break the cross shaft free from the collar and bushings. After it moves freely I begin to cut away the rubber from the collar I grab my drill and punch a few holes in the bushing. Once a few holes are drilled I can grab the collar with a pair of channel locks and pull it out.
Attached Images
My Chevy habit is paid for by Ford diesels...
Here is my SLOW LS install:
Caliper Rebuild:
Upper Control Arm Bushings:
IG mattcrp1
mattcrp1 is offline