Re: No Limit R&P Steering Shaft Angles
looks pretty good. These U-joints can go to 30 degrees OK. check to make sure the shafts are not protruding into the U-joint center, and touching. Also, I know the set screws are sometimes an issue. One long/one short. I usually cut the long one down to match the short. Make sure the set screws are not rubbing on the frame/mount bolt when rotating the steering. Last, check PG's solution. I have also fixed many steering issues with some light clearancing with a Dremel tool. Please let us know what the solution is. Thanks.
__________________
GoodGuys 2012 Pro-Truck Champion
2012 Truckin' Throwdown Champion
GoodGuys 2011 National Champion
2011 Truckin' Throwdown Champion
GoodGuys 2010 National Champion
Proud to put our products up against all others!
|