The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Pvmt-Pndr** · 04-29-2019, 12:42 PM

I got her all tuned up yesterday. I noticed on cylinder 5 that the wire had pulled from the boot just enough that it could have caused a misfire. New plugs and wires are in.

The block huggers I bought worked, they're installed and ready for the exhaust. I did have to clearance #6 where it touched the frame. Impact socket and a hammer, beat in about 3/32 of an inch and problem solved. You can't even tell I had to do it.

I plan to fire her up today between breaks in the rain and check the timing.

I'll post pictures when I find a better hosting site then photobucket.

04-29-2019, 12:42 PM	#11
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 69 C60 Mega Truck Hauler I got her all tuned up yesterday. I noticed on cylinder 5 that the wire had pulled from the boot just enough that it could have caused a misfire. New plugs and wires are in. The block huggers I bought worked, they're installed and ready for the exhaust. I did have to clearance #6 where it touched the frame. Impact socket and a hammer, beat in about 3/32 of an inch and problem solved. You can't even tell I had to do it. I plan to fire her up today between breaks in the rain and check the timing. I'll post pictures when I find a better hosting site then photobucket.