[clinebarger]

Grab the 3-4 Apply Ring by the Fingers, Lower the Assembly down into the Input Drum, The Forward Piston will stop short, The Apply Ring & Return spring will fall to bottom.

Use a Lip Wizard or other Lip Seal tool to fit the Inner Forward Piston Lip Seal onto the Input Drum, The Piston & Housing will drop onto the return spring.

Install Overrun Piston next, If reusing Aluminum piston, Install both Lip Seals.
Lube Inner & Outer Lip Seal with TransJel, Using a Lip seal tool, Fit the Inner seal FIRST!, When the Piston will no longer "Rock" side to side....Fit the Outer Overrun Piston Seal to the Forward Clutch Piston.

Install Overrun Piston Return Spring Assembly on top of Overrun Piston, Compress spring & Install Snap Ring.

A beginner may want to practice a little with the old lip seals/pistons.