[TKCR]

Changing out the pins & bushings on the doors. The PO seemed to think it was easier to tack weld the pins to the bottom of the hinge bracket, rather than just put back the C-clip! My brother came up to help, we ended up taking the door off by unbolting the hinge brackets. That gave us a little more room to use a Dremel and grind off the welds. Several hours later, we finally got the pins out!! Well, one door that is! While the door is off, I’m going to clean up the door jamb and do some spray paint touch ups. Another day we will reinstall the door and start the process over again, with the other door. 🥵