The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**mongocanfly** · 05-18-2019, 04:50 PM

Also getting close to finalizing the brackets for the hydraulic clutch master...its still in r&d mode...turns out a 1:1 ratio was gonna work ok on the bellcrank..
I'll clean up and shape the brackets some..I had to order a banjo fitting to go on the reservoir end ..a 90deg -3an hose stuck up a little to high and was to close to the floorboard..

05-18-2019, 04:50 PM	#508
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Columbus..the 1957 IH 4x4.. Also getting close to finalizing the brackets for the hydraulic clutch master...its still in r&d mode...turns out a 1:1 ratio was gonna work ok on the bellcrank.. I'll clean up and shape the brackets some..I had to order a banjo fitting to go on the reservoir end ..a 90deg -3an hose stuck up a little to high and was to close to the floorboard.. Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 05-18-2019 at 04:57 PM.