Quote:
Originally Posted by shamrock1953
Hussey I just looked at your build and I'm still a lil confused so did you drill out the mounts then relocated them or you redrilled the conversion mounts any help is appreciated thanks guys
|
No drilling on the conversion mounts or the rubber mounts, just the two lower holes where the conversion mounts on the drivers side of the chassis. Once you have your conversion mounts it'll be more clear. But, on the passengers side you can install all three bolts to bolt the conversion mounts to the chassis. On the drivers side you can install the top bolt but will have to drill the lower two on the chassis. You can use your original mounts which have ob-longed holes in them as a guide.
Then, bolt you rubber mounts to you engine, Anchor 2713, and you're set.