Quote:
Originally Posted by Jstock85
You mind sharing the brand with part number and such for that fuel pump?
|
No problem, it was a walbro GSS342 in tank universal pump. 255 LPH high pressure. I did modify the new sending unit by removing the round base plate from the bottom of the unit that kept the pump from lining up with the outlet tube and prevented the pick up from mounting to the bottom of the pump properly. It's a universal pump so not made specifically to fit this sending unit.
The GSL392 pump is the inline version of the same pump.
On another note, I need to bring the harness back for an alteration. He made it to mount the ECU either inside the cab or on the passenger side and I'm mounting it like it was on the donor truck, near the battery on the driver side. The starter solenoid was replaced at a shop that repairs starters and alternators. He said the solenoid is the same as the ones used on a forklift but I didn't get a part number. They are available on ebay or other online retailers though. Even walmart.com had them listed for about $15.