The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**dennislbrooks** · 04-21-2018, 04:49 PM

I have a low pass crossover adjustment now I think on the xc2410. Finding a 300 watt per channel that is the approximate size of the xc2410 may be difficult. I do not want 300 watts going to my front speakers. What are my options for getting suitable power to the sub? Crutchfield says 250 to 500 watts to a 10 inch sub. There is a Clarion xc2110 mono for a sub but I do not have a sub output on the head.

Looks like I may have to change the amp and also relocate it to under the passenger seat. I have a Coustic 321QE but it looks like it is not enough also.

Or remove the sub.....

04-21-2018, 04:49 PM	#3
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,764	Re: Setup question with what I have I have a low pass crossover adjustment now I think on the xc2410. Finding a 300 watt per channel that is the approximate size of the xc2410 may be difficult. I do not want 300 watts going to my front speakers. What are my options for getting suitable power to the sub? Crutchfield says 250 to 500 watts to a 10 inch sub. There is a Clarion xc2110 mono for a sub but I do not have a sub output on the head. Looks like I may have to change the amp and also relocate it to under the passenger seat. I have a Coustic 321QE but it looks like it is not enough also. Or remove the sub..... __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T Last edited by dennislbrooks; 04-21-2018 at 05:19 PM.