Quote:
Originally Posted by TruDom
if you bought the harness for this truck
https://www.americanautowire.com/PDF...20IN%203.1.pdf
on sheet 2 the top right shows a pic of a purple split wire with connectors. that plugs into the neutral safety switch and connects to the 2 purple wires coming out of the main harness. (no splicing and no terminals to solder on)
the backup switch is #7 on that sheet and looks like you solder on connectors and an 'L' plastic piece. plug right into backup switch.
the brake switch #5 (is above the middle of the steering column. Way up there)
looks like this https://www.partsgeek.com/assets/pro...0-MKMQXTM3.jpg
should not have to solder or splice anything. it should just clip on.
i could probably come by this weekend if you are still having trouble. |
The pic of the harness you have isnt the same one I got. Mine was the 20 circuit from brothers here: https://www.brotherstrucks.com/DELUXE-20-CIRCUIT-WIRING-HARNESS/productinfo/UWH0018/
I致e wired up the neutral safety switch w the purple wires, the brake light with the orange and white, but I知 having trouble finding where to splice into in order to plug in the reverse lights, and where to put the brake warning light. The instrument cluster plug I have is attached below. The two wires I have left are the two tan wires on pin #2. I知 not sure if I connect the brake warning lamp to one wire, and take the other one to the ignition, or what. I知 making good progress, I知 just at a spot where I知 handcuffed because all the stuff I have left is dependant on specific wiring.
Posted via Mobile Device