The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**D.PASSMORE** · 06-09-2015, 09:13 PM

Finally got this completed, not a lot of info out there to ensure all the parts is on-hand to make the change over. It was rather easy, so here is the parts numbers and some explaining:
Dana Shafts:
Long: 27902X
Short: 27901X
Outer stub axle: 41677 (2ea)
Slinger: 36364 (2ea) – Pressed onto Outer Stub Axle
Seal Kit: 706527X (2ea) Dust seal rides on Slinger shoulder, thin side facing spindle.
U-Joints: 5-760X (2ea)
Spindles: 706528X (2ea) 1973 – 1976 spindles. You have to use these because the inner surface is machined smooth, polished for seal kit. See Jerry Moos explanation ^^.
Bearings: Set-37 and Set 45 (each side)
Hub Seal: 422380 (each side)

06-09-2015, 09:13 PM	#7
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: Changing axles, front dana 44 Finally got this completed, not a lot of info out there to ensure all the parts is on-hand to make the change over. It was rather easy, so here is the parts numbers and some explaining: Dana Shafts: Long: 27902X Short: 27901X Outer stub axle: 41677 (2ea) Slinger: 36364 (2ea) – Pressed onto Outer Stub Axle Seal Kit: 706527X (2ea) Dust seal rides on Slinger shoulder, thin side facing spindle. U-Joints: 5-760X (2ea) Spindles: 706528X (2ea) 1973 – 1976 spindles. You have to use these because the inner surface is machined smooth, polished for seal kit. See Jerry Moos explanation ^^. Bearings: Set-37 and Set 45 (each side) Hub Seal: 422380 (each side) __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)