The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Wrenchbender Ret** · 03-25-2021, 04:24 PM

The hole on my shoe is slightly too small for the cup to pass through. It would be easy to drill it up 1/32" so the cup will pass through if that's how it should be, just wanted to ask before doing it.[/QUOTE]

Make sure you have the secondary shoe to the rear. It is the shoe with the longest lining. If so you can drill the hole out to fit the cup.

03-25-2021, 04:24 PM	#6
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,192	Re: Brakes on a 12 Bolt Rear Axle The hole on my shoe is slightly too small for the cup to pass through. It would be easy to drill it up 1/32" so the cup will pass through if that's how it should be, just wanted to ask before doing it.[/QUOTE] Make sure you have the secondary shoe to the rear. It is the shoe with the longest lining. If so you can drill the hole out to fit the cup.